EN 14766 山地自行车 Mountain-bicycles
认证网 (2017/12/6 12:31:45) 浏览:841 评论:0
Test item 测试名称: 山地自行车 Mountain-bicycles
Test info 测试内容：
4.2 Sharp edges 利边
4.3 Security and strength of safety-related fasteners 安全紧固件强度测试
4.4 Crack detection methods 裂缝探测方法
4.5 Protrusions 突出物
4.6 Brakes 刹车
4.7 Steering 操纵系统
4.7.1 Handlebar - Dimensions尺寸
4.7.2 Handlebar grips and plugs 车把手握把和插销
4.7.3 Handlebar stem -insertion-depth mark or positive stop车把手立管插入深度标记
4.7.4 Handlebar stem -extension to fork-stem-clamping requirements车把手立管延伸处装夹要求
4.7.5 Steering stability 操纵稳定性
4.7.6 Steering assembly-Static strength and security tests 静态强度及牢固性
4.7.7 Handlebar and stem assembly - Fatigue test 把手及立管疲劳
4.8 Frame 车架
4.8.1 Suspension frame - Special requirements 特殊要求
4.8.2 Impact test (Falling mass) 冲击测试
4.8.3 Frame-Fatigue test with pedalling forces 车架动态摇摆
4.8.4 Frame-Fatigue test with a vertical force 垂直力疲劳
4.9 Front fork 前叉
4.9.1 General 一般要求
4.9.2 Means of location of the axle 前叉轴之要求
4.9.3 Suspension fork - Special requirements 特殊要求
4.9.4 Front fork - Static bending test 静态弯曲测试
4.9.5 Front fork - Rearward impact test 向后冲击测试
4.9.6 Front fork - Bending fatigue test 弯曲疲劳测试
4.9.7 Forks intended for use with hub - or disc brakes 使用於花鼓或碟式煞车之前叉
4.1 Wheels and Wheel/tyre assembly轮子
4.10.1 Rotational accuracy 真圆度
4.10.2 Wheel/tyre assembly - Clearance 轮子间隙
4.10.3 Wheels - Static strength test 轮子静态强度测试
4.10.4 Wheels - Wheel retention 轮子保持力测试
4.10.5 Wheels - Quick release mechanisms 快卸机构
4.11 Rims , Tyres and tubes 轮缘, 轮胎
4.12 Mudguards 挡泥板
4.13 Pedals and pedal/crank drive system 踏板和曲柄
4.13.1 Pedal tread 踏板面
4.13.2 Pedal clearance 踏板间隙
4.13.3 Pedal/pedal spindle assembly - Static strength test 踏板/踏板轴组件 - 静态强度
4.13.4 Pedal spindle - Impact test 踏板轴冲击
4.13.5 Pedal/pedal spindle - Dynamic durability test 踏板/踏板轴组件 -动态疲劳测试
4.13.6 Drive system - Static strenght test 传动系统强度
4.13.7 Crank assembly - Fatigue test 曲柄组疲劳测试
4.14 Saddles and seat-pillars 座垫和座垫轴
4.14.1 General 一般要求
4.14.2 Limiting dimensions 尺寸
4.14.3 Seat pillar insertion mark 座垫轴插入深度记号
4.14.4 Saddle/seat pillar - Security test 座垫和座垫轴强度
4.14.5 Saddle - Static strength test 座垫轴静态强度
4.14.6 Saddle and seat-pillar clamp-Fatigue test座垫及座杆疲劳测试
4.14.7 Seat pillar - Fatigue test 座垫轴疲劳测试
4.15 Drive-chain 传动链条
4.16 Chainguard 链条盖
4.17 Spoke connector 轮辐连接器
4.18 Luggage carriers 行李架
4.19 Handling and operation of a fully-assembled bicycle 路况测试
4.2 Lighting systems and reflectors照明系统及反射镜
4.21 Warning device报警装置
5 Instructions 说明书
6 Marking 标签
Informative items
Annex B Steering geometry 掌舵部分几何图
Annex C Structural intergrity of the fully assemblyed bicycle整车综合强度测试
Annex D Wheel/tyre assembly - Fatigue test 轮子轮胎疲劳测试
Lead time 测试周期: 常规 Regular service 25 working days
Sample size 送样规格:
2 sets of completed products
2 pcs of front fork
2 pcs of frame & fork assembly
3 pcs of chain
3 pcs of handlebar and stem
1 pcs of saddle & saddle pillar assemble
1 pcs of saddle pillar
1 pcs of chainwheel and crank assembly
1 pcs of pedal.
全套样品2套
前叉2套，车架前叉组两件，传动链条3条，把手组3套，鞍座座杆组件1套，座杆1件，链盘曲柄组各一件，脚踏一件
Test info 测试内容：
4.2 Sharp edges 利边
4.3 Security and strength of safety-related fasteners 安全紧固件强度测试
4.4 Crack detection methods 裂缝探测方法
4.5 Protrusions 突出物
4.6 Brakes 刹车
4.7 Steering 操纵系统
4.7.1 Handlebar - Dimensions尺寸
4.7.2 Handlebar grips and plugs 车把手握把和插销
4.7.3 Handlebar stem -insertion-depth mark or positive stop车把手立管插入深度标记
4.7.4 Handlebar stem -extension to fork-stem-clamping requirements车把手立管延伸处装夹要求
4.7.5 Steering stability 操纵稳定性
4.7.6 Steering assembly-Static strength and security tests 静态强度及牢固性
4.7.7 Handlebar and stem assembly - Fatigue test 把手及立管疲劳
4.8 Frame 车架
4.8.1 Suspension frame - Special requirements 特殊要求
4.8.2 Impact test (Falling mass) 冲击测试
4.8.3 Frame-Fatigue test with pedalling forces 车架动态摇摆
4.8.4 Frame-Fatigue test with a vertical force 垂直力疲劳
4.9 Front fork 前叉
4.9.1 General 一般要求
4.9.2 Means of location of the axle 前叉轴之要求
4.9.3 Suspension fork - Special requirements 特殊要求
4.9.4 Front fork - Static bending test 静态弯曲测试
4.9.5 Front fork - Rearward impact test 向后冲击测试
4.9.6 Front fork - Bending fatigue test 弯曲疲劳测试
4.9.7 Forks intended for use with hub - or disc brakes 使用於花鼓或碟式煞车之前叉
4.1 Wheels and Wheel/tyre assembly轮子
4.10.1 Rotational accuracy 真圆度
4.10.2 Wheel/tyre assembly - Clearance 轮子间隙
4.10.3 Wheels - Static strength test 轮子静态强度测试
4.10.4 Wheels - Wheel retention 轮子保持力测试
4.10.5 Wheels - Quick release mechanisms 快卸机构
4.11 Rims , Tyres and tubes 轮缘, 轮胎
4.12 Mudguards 挡泥板
4.13 Pedals and pedal/crank drive system 踏板和曲柄
4.13.1 Pedal tread 踏板面
4.13.2 Pedal clearance 踏板间隙
4.13.3 Pedal/pedal spindle assembly - Static strength test 踏板/踏板轴组件 - 静态强度
4.13.4 Pedal spindle - Impact test 踏板轴冲击
4.13.5 Pedal/pedal spindle - Dynamic durability test 踏板/踏板轴组件 -动态疲劳测试
4.13.6 Drive system - Static strenght test 传动系统强度
4.13.7 Crank assembly - Fatigue test 曲柄组疲劳测试
4.14 Saddles and seat-pillars 座垫和座垫轴
4.14.1 General 一般要求
4.14.2 Limiting dimensions 尺寸
4.14.3 Seat pillar insertion mark 座垫轴插入深度记号
4.14.4 Saddle/seat pillar - Security test 座垫和座垫轴强度
4.14.5 Saddle - Static strength test 座垫轴静态强度
4.14.6 Saddle and seat-pillar clamp-Fatigue test座垫及座杆疲劳测试
4.14.7 Seat pillar - Fatigue test 座垫轴疲劳测试
4.15 Drive-chain 传动链条
4.16 Chainguard 链条盖
4.17 Spoke connector 轮辐连接器
4.18 Luggage carriers 行李架
4.19 Handling and operation of a fully-assembled bicycle 路况测试
4.2 Lighting systems and reflectors照明系统及反射镜
4.21 Warning device报警装置
5 Instructions 说明书
6 Marking 标签
Informative items
Annex B Steering geometry 掌舵部分几何图
Annex C Structural intergrity of the fully assemblyed bicycle整车综合强度测试
Annex D Wheel/tyre assembly - Fatigue test 轮子轮胎疲劳测试
Lead time 测试周期: 常规 Regular service 25 working days
Sample size 送样规格:
2 sets of completed products
2 pcs of front fork
2 pcs of frame & fork assembly
3 pcs of chain
3 pcs of handlebar and stem
1 pcs of saddle & saddle pillar assemble
1 pcs of saddle pillar
1 pcs of chainwheel and crank assembly
1 pcs of pedal.
全套样品2套
前叉2套，车架前叉组两件，传动链条3条，把手组3套，鞍座座杆组件1套，座杆1件，链盘曲柄组各一件，脚踏一件
检测认证热线：18768485300 & QQ在线服务:
上一篇：尿不湿检测项目及检测标准下一篇：玩具小火车办理EN71安全指令
相关内容：
- 暂无内容！
